Lola loves… DIY fabric jewellery

Remember this ring I blogged about a while ago? I told you I’d post about how I made it. Well, it’s been a while but here it is.

Making these fabric jewellery pieces feels a little bit like magic. You can use any image you like so long as its laser printed onto paper. The best bit is that the process can be used for all sorts of projects so you can create customised fabric either to frame or use for your next sewing project.

Because of the process involved, the fabric ends up a little like waxed fabric, which means it’s great for items that need to be wiped clean like table runners or make-up bags.

Here’s a few more I made using the same process…

What you will need:

An image laser printed onto paper (it must be laser printed, not ink or it won’t work)
A scrap of fabric
Acrylic gel medium (you can find this online, or in art supply shops)
A paint brush
Ring / brooch findings (see picture, right)
Fabric scissors
Pliers
A needle and thread
Water

Using a laser jet printer, print your chosen image onto paper. Make sure that the image is slightly smaller than the findings (see above). I chose circular findings for the ring and larger oval findings for the brooch but you will find lots to choose from at craft or jewellery stores, or online.

Paint the printed image generously with gel medium and lay it face down on a scrap of fabric. Pat down to get out any air bubbles or creases. (Make sure to wash your brush quickly or the gel medium will dry and be hard to get off.) Hang the fabric pieces up to dry for 24 hours.

Once they are fully dry, wet the paper and carefully peel it off the fabric. The best way to do this is to rub it with you fingertips but be gentle around the edges as the gel, not just the paper, may start to lift.

As you remove the paper you will see your image imprinted on the hard layer of gel.

Make sure all the paper is off. As the paper is wet it may be hard to see and you might find that once your fabric is dry there is still a little paper left. If so, repeat the process.

Once all the paper is off, hang your fabric to dry. Once dry, paint it with another layer of gel medium – this time thin – and hang to dry again.

Now that you have your bespoke fabric, it’s time to make the jewellery.

Simply stretch the fabric over the disc section of the jewellery finding making sure that the image is well centered. Trim any excess fabric and secure at the back with a few stitches. You will find that the gel has made the fabric stiff, which may create corners instead of smooth edges. Add a few stitches here to smooth these out.

Next, pop the disc onto the back piece of the finding (the ring or brooch base) and press the teeth down with pliers. Enjoy your new jewellery!

Advertisements

About LolaLovesCraft

A fond crafter, I enjoy creating and upcycling whenever I get a free minute. Follow my blog with Bloglovin View all posts by LolaLovesCraft

3 responses to “Lola loves… DIY fabric jewellery

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Two Busy Brunettes

two brunette sisters busy with crafting, cooking, teaching, reading and living

lovebeautynotcruelty

Living beauty without the need for cruelty to our fluffy friends X

Airy Mountain Goods

A topnotch WordPress.com site

Home and Garden Welcome.com

Bringing you home, wherever you live.

The Dawn Report

Dawn O'Porter

Uknit2

I get lots of fibre.

hopelovesjohnnie

All that sparkles and glitters-handmade with love...

%d bloggers like this: